Good morning guys welcome back and today’s article we’re going to be working on the 60 motor. Yet again, so we’re going to move the white truck we’re going to get the 60 p back down here. I don’t know if we’re going to put it in the shop today um, but we’re going to get it down here. Cuz! Well, there’s a bunch of stuff in the bed that well for one we need and two uh.
We need to clean. So, let’s hop in here real, quick and I’ll show youall what we got going for this one and um, like I said we’re going to remve the white truck, get the tractor and we’re going to pull the truck back down here, uh here in just a moment, But I figure I’ll uh go ahead and show youall what we got going for today, also guys I wanted to mention. I will leave a link down below if y’all want to check out holders uh big, thank you to holders for getting those turned around really really quick and back to us uh if y’all know or if y’all were paying attention uh, we pulled the injectors out of The truck sent them in and they went ahead and remand them um believe we also threw in new solenoids uh. If I remember correctly, I believe so um, but I shipped them out on a Friday um I mean it was like the next, not the next Monday, like 3 Days Later Monday, but the next Monday after that. So pretty pretty quick all in all and very very happy with that.
So big, thank you to Holders uh again for getting those turn around super super quick uh again, I will leave a link to Holders Down Below in the description as well as all the other companies we’ had the ability to work with not only on the 60 Project but the 300, the blue truck and also the white truck um so again I’ll leave that down in the description as well as a bunch of discount codes, um a bunch of the companies we’ve had the ability to work with. I do have a bunch of discount codes down there as well, so if y’all want to check those out some of those I’m not even going to lie to y’all some of those, I do get a small commission from um, but all of them uh, except for I think one company yall do get a discount and uh the one company you get some free stuff with your order. So just thought I’d mention that again, like a full transparency type thing, but regardless, I believe I believe, that’s it. So we’re making really good progress with the 60 um. I have one more video coming up for y’all uh, which will be the next one that y’all see of that truck and then uh.
We do have a little bit of a standstill. While we wait on stuff to come back uh from sand blasting, so we can powder coat and then some stuff to come in the mail uh for the truck as well so uh. We do have a few things waiting for, but all in all we’re making really good progress on the truck, and I’m super super happy with it. So anyway, guys with that being said, let’s get back to it and uh. Let’S get our new injectors installed all right.
So, as yall seen in the last video, we got our new power stroke products heads in we got the the push rods are in the Rockers are in all the studs are torqued uh. So now we’re going to be working on is our holders injectors. So we have lots of stickers here um, but, like I said, we are going to be working on installing our holders, Diesel Performance injectors. I will leave a link to these guys down below in the description if y’all want to check them out uh they got. These turned around very quickly, so we have uh for the truck here.
You can see we have some 20530 um in here so anyway, we’re going to work on getting these guys installed here today and uh make progress toward getting the um valve covers on and getting this thing ready to set back in the truck. One thing thing we are waiting for as far as installing the motor goes is. I have some uh some stainless manifolds on the way that we’re going to test out and see. If we like them um, we need to get the rear, main seal and front seal. Put in, and also I’m waiting for my hooks to come back from sand blast, so I can powder them and throw them on um.
I figure that’ll be easier to do while the motor is sitting here uh rather than in the truck and then also over. Here. We have these guys, which is part of our bless performance, regulated return, we’re also going to install in the back of these heads. So anyway, I’m going to uh and don’t worry. We have been covering this thing up while we’re not working on it.
Don’T worry um again, we have been covering this thing up, but the goal for today um, I’m probably going to film two at least two different videos today, but the goal for me today is to have the valve covers on this thing. So um, like I said this one we’ll get these injectors in um and we’ll get the truck down here and maybe just maybe we’ll throw the oil rails on. I don’t quite know yet we’ll see how things work out, but anyway, let’s go ahead. Get back up here to the house and uh: let’s get the truck down here! That way, I’m go ahead.
Start cleaning, some stuff up and uh whatnot so should be, should be fun but uh, not too bad. So, let’s get up here, we’ll get it moved down here and, like I said, we’ll, go ahead and start cleaning some stuff up and go ahead and get our new injectors in all right. So, like I said back here, we do have a bunch of stuff uh that needs cleaned up and all that kind of thing. So we’ll get this back down there uh. We also have our injector hold downs and uh some other Hardware that we’re going to need today.
So uh it’ll be helpful to have this down there and uh we’re not far from getting ready to put the motor back in this thing anyway. So go ahead. Put it in neutral and uh we’ll get ready to run this thing down there all right, so we got the truck down here. Um. If you hear the airplanes in the back, that is our our lovely Air Force um, that’s a actually a good segue!
Thank you to everybody who has served for our country. They actually do um low altitude flying through here um few times a day, but regardless we got the truck down here, um pretty in eventful. Now what is going to be rather eventful? I have a just a imagination for is getting this in there cuz. This is all up here and then there’s a pretty good little jump into the shop uh.
So that ought to be real, interesting but um regardless we got the truck down here. So uh we’re going to get a few things out of the bed take into the shop like said we’re going to do some cleaning and then we’ll go ahead and get our new injectors installed. All right so had to run and get some extended length. Uh torqus um actually went to a bumper bumper and they add these, so these regular length put them in here. You can see it’s hitting the injector and it’s sitting sideways um.
So with these sneaks you out on down in there nice and straight, and you get right on there with torque wrench, so got these torqued and uh whatnot, so that’s uh! That is that so, like I said we got these at a bumper to bumper. I believe Nappa also was supposed to have them went to Harbor Freight and they didn’t have any in stock. So anyway, now um, I got to go, do a few things and I think that’s going to be a wrap for this one.
